5 Major Causes of SD Card Failure


Secure Digital (SD) card is a non-volatile memory card used in camcorders, music players, smartphones, tablets, digital cameras, and other portable devices for storing photos, videos, and other important data. With the ease of storage and convenience it offers, there is no doubt why it is present in almost every electronic device today.

But just like external hard drives and other storage devices, SD cards are prone to severe damage and failure. They have a limited lifespan and with each passing day, the chances of getting corrupted increase. When there is any corruption in the SD card, the whole data stored on it is rendered inaccessible with the worst cases of getting lost forever.

Therefore, to keep your data safe and sound, always make sure you keep a backup of the whole data in another storage device or system, or else you will be in a regretful zone throughout your life.

As an astute user, you should be aware of some of the common causes that can harm your SD cards and result in data loss:

  1. Negligence

It is important to note that SD cards are very delicate and require the utmost care when handling. Even the slightest negligence on your part can affect the condition of the SD card drastically. SD cards should be kept in proper cases when not put in the device. Also, be extremely cautious while inserting or taking out the SD card from the device.

Also, make sure the device is turned off while removing the card and is not stored in hot or humid surroundings.

  1. Accumulation of Bad Blocks

Just like the hard drive, the SD cards tend to develop bad blocks as they age. The bad blocks are the bad storage space where the data cannot be stored anymore. With time, the bad blocks keep on accumulating and reduce the performance level of SD cards.

The major cause of these bad sectors is the practice of removing the card without ensuring a safe mode.

  1. Format Errors

There may be situations where you may have to format your card for certain reasons. In such a scenario, you have to take extra care for carrying out the process. There shouldn’t be any interruptions or errors during the formatting of the card or else it will damage it.

A damaged card is very difficult to repair and the data that once gets lost in the process is lost forever.

  1. Virus or Malware Attack

The SD card easily fails when it gets infected with any virus or malware. It can affect the current status of the files and also make the data unreadable.

Usually, such incidents happen accidentally. And, when happens, the whole data stored on the device is going to get contracted or lost.

  1. Manufacturing Defect

Today, the market is full of brands dealing in the manufacturing of SD cards. Each vendor is giving neck-to-neck competition to another in terms of prices. The price of SD cards ranges from lowest to highest. All this is because of the difference in the quality of the product.

Many SD and MicroSD cards are full of defects and give a poor performance because they belong to some local amateur vendor who doesn’t have specialization and knowledge.

If you have recently lost any data, then contact a professional data recovery service center today.